Airplane parts rapid mold tools

Product information:

Plastic Molding and Production:

1. Export Mold: 80%

Exporting mold is making mold to customer. This kind of mold will design per customer standard, like DME, Hasco, Progressive, PCS ect standard.

From the mold construction, we can make unscrew mold, overmold, double color mold, insert mold, stack mold, mud mold etc.

2. Rapid Tool ( Mold stay in China) 20%

Rapid Tool system can send the T1 sample to customer within one week, which is suit for the small annual output and research & development process’ parts.

This kind of mold just can make part in China. The mold is Chinese standard.

Wintech plastic injection molding production process:

Plastic Injected Part Materials

There are thousands of thermoforming and thermosetting plastics to choose from for your project. In addition, mechanical and chemical characteristics can also be enhanced with additives like glass fibers, UV stabilizers and lubricants. Our materials sheet will give you more detailed information about the standard types and the tolerances to expect with each.

Your choice of resins may depend upon one or more of the following considerations:

UV, chemical, abrasion and impact resistance

Cost of raw material

Mechanical strength

Weight and density

Flexibility

Transparency

Recyclability

Molding Tolerances

Molding tolerance is a specified allowance on the deviation in parameters such as dimensions, weights, shapes, or angles, etc. To maximise control in setting tolerances there is usually a minimum and maximum limit on thickness, based on the process used. Injection molding typically is capable of tolerances equivalent to an IT Grade of about 9–14. The possible tolerance of a thermoplastic or a thermoset is ±0.008 to ±0.002 inches. In specialised applications tolerances as low as ±5 µm on both diameters and linear features are achieved in mass production. Surface finishes of 0.0500 to 0.1000 µm or better can be obtained. Rough or pebbled surfaces are also possible.

All plastic material will expand and contract under the influence of heat and moisture. Our tolerance guide will give more general information on the characteristics of most common resin types for typical part features.

We will work closely with you to optimize your designs for manufacturing. We will indicate any areas where poor design may produce thermal stress, shrinkage, warping, etc. Consult our design guide for more information on common defects and how to avoid them.